Marking Ink -- Epoxy Ink

MARCO EPOXY-BASED
AND SOLVENT RESISTANT INKS

MARCO #6459 One-Part Epoxy Ink

SURFACES: metal, plastic, all non-porous surfaces

DRYING TIME: 10 seconds to touch

CHARACTERISTICS: a one-part epoxy ink for marking on all non-porous surfaces. Properties are similar to a 2-part epoxy, but this ink DOES NOT MEET Govt. Spec. MIL-I-43553. Does resist most solvents and degreasers and is made with true epoxy resin.

SOLVENT SYSTEM: alcohol

COLORS: black, blue, brown, gray, green, orange, red, violet, white, and yellow

COLOR SYSTEM: dye

MARCO #6459 One-Part Epoxy Ink BLACK	$13.50	4 Oz Bottle
MARCO #6459 One-Part Epoxy Ink BLACK	$18.75	8 Oz Bottle
MARCO #6459 One-Part Epoxy Ink BLACK	$25.50	Pint Bottle
MARCO #6459 One-Part Epoxy Ink BLACK	$36.30	Quart Bottle

MARCO #6459 One-Part Epoxy Ink COLORS	$12.75	4 Oz Bottle
MARCO #6459 One-Part Epoxy Ink COLORS	$16.95	8 Oz Bottle
MARCO #6459 One-Part Epoxy Ink COLORS	$23.50	Pint Bottle
MARCO #6459 One-Part Epoxy Ink COLORS	$33.50	Quart Bottle

MARCO Two-Part Epoxy Ink

SURFACES: ceramics, phenolics, polyesters, melamine, silicones, ferrous and non-ferrous metals, glass, electronic parts DRYING TIME: dries to touch within 2 - 3 hours. Adding heat shortens curing time. Max. adhesion and chemical resistance takes 7 - 10 days. Requires addition of catalyst imeediately before use.

CHARACTERISTICS: a 2-component epoxy ink developed to be the most permanent ink available for use with a wide range of difficult to mark substrates. It's the most resistant ink available against solvents, chemicals and hydrocarbons, and will withstand temperatures over 600 degrees F. The only ink that meets Govt. Spec. MIL-I-43553.

COLORS: black and white

COLOR SYSTEM: pigment

SOLVENT SYSTEM: glycol ethers

2-Part Epoxy Ink	$16.00	0.5 Oz Packets
2-Part Epoxy Ink	$120.00	Quart Bottle

#1160 High Temperature Ink

SURFACES: glass, metal, plastic, foil, cellophane, and most other non-porous surfaces.

DRYING TIME: 1 - 2 minutes (decreased by exposure to heat)

CHARACTERISTICS: a non-toxic, waterproof ink with excellent adhesion. Once dry, the imprint will withstand temperatures up to 600 degrees F.

COLOR SYSTEM: Pigment

SOLVENT SYSTEM: Alcohol

COLORS: White

#1160 High Temperature Ink	$13.25	4 Oz Bottle
#1160 High Temperature Ink	$17.25	8 Oz Bottle
#1160 High Temperature Ink	$23.25	Pint Bottle
#1160 High Temperature Ink	$33.75	Quart Bottle

MARCO S-1432 Stamp Ink

DRYING TIME: 15 to 30 seconds

CHARACTERISTICS: resists solvents such as degreasers, freon, alcohol, cleaning fluids, trichlorethylene, soap and water; the longer the ink is allowed to dry, the harder the impression becomes. Excellent adhesion.

COLORS: black

MARCO S-1432 Stamp Ink	$16.00	4 Oz Bottle
MARCO S-1432 Stamp Ink	$21.00	8 Oz Bottle
MARCO S-1432 Stamp Ink	$28.25	Pint Bottle
MARCO S-1432 Stamp Ink	$40.25	Quart Bottle
MARCO S-1432 Stamp Ink	$112.00	Gallon Bottle

MARCO EPOXY-BASEDAND SOLVENT RESISTANT INKS

MARCO EPOXY-BASED
AND SOLVENT RESISTANT INKS